The FältCom MIIPS® Committo is a versatile communication platform offering high security, availability and functionality. Comprehensive remote managment and monitoring are promoted by FältCom’s Device

Management system. This Linux based platform allows for local intelligence in vehicles and at remote sites globally.

The FältCom MIIPS® Committo is a communication platform with many areas of use, including secure mobile LANs, Internet access and positioning of vehicles and other mobile units. The customer can achieve wireless Machine to Machine (M2M) communication in a very secure and cost-efficient manner. Monitoring, reading and control of equipment can be conducted in real-time.

The FältCom MIIPS® Committo can also be used as an advanced router with the built-in firewall in regular WANs alternatively as a Network Management node allowing for redundancy through the cellular network.

The Device Management server, FältCom Enterprise Server, allows for comprehensive remote management and monitoring. This offer many advantages compared to the common stand-alone solutions on the market, among other things the elimination of the need for on-site configuration and field upgrades of the terminals. This substantially reduces the Total Costs for Ownership (TCO).

To continuously send uncontrolled data over a cellular network can cause excessive costs for the data communication.

Thanks to the local intelligence and advanced configuration possibilities in the terminal the data communication through the FältCom MIIPS® Committo can be controlled effectively thus reducing unnecessary data traffic with significant cost-savings as a result.

The MIIPS® Committo is of a fanless and maintenance free design it is uses an 454Mhz ARM processor based on the ARM926EJ-S core and have a Linux OS.

Article No. FältCom MIIPS® Committo:

The FältCom MIIPS® Committo meets applicable standards for industrial, vehicle and alarm use, fulfilling corresponding requirements for heat, cold, vibrations, shock, radio interference etc. Customisation of the software as well as the hardware can be done for customer specific functionality and service needs.

 

The terminal has 2 Ethernet ports for connection to WAN and LAN. Both ports can also be configured for separate LANs, each comprising up to 253 usable IP addresses as standard.

The 2 serial ports makes possible transparent connection serial to IP and with optional logic for control of the connection which is often a problem in serial communication.

The 2 CANbus1 ports can be connected e.g. to a vehicles CANbus system in accordance with the FMS-Standard and Bus-FMS-Standard2 for retrieving operating data such as engine status and service needs. For example fuel consumption and driver behavior can be supervised, promoting efficient ecodriving.

Besides handling of CAN information in customer-adapted applications, the hardware supports filtering out of CAN data.

The 6 ports can be configured separately to provide event notifications for circuit make/break, threshold values or window values. These ports can be connected e.g. to sensors for door opening, temperature and humidity.

The 4 digital I/O ports can be used to detect and control different external equipment.

Two 1-pole switching relays for galvanic isolation.

USB

The USB host port can be used for expansion with such accessories as memory sticks, hard disk drive, Bluetooth, WiFi and ZigBee.

An internal SD connector allows for expansion with e.g. memory stick.

All interfaces can be configured remotely from the FältCom Enterprise Server.

Note: Depending on use of the interfaces, a corresponding driver or customisation of the software might be needed.

The FältCom MIIPS® software supports a series of features that

1 Controller Area Network, a broadcast shared serial bus standard used mainly in the automotive sector or as field bus.

2 FMS; Fleet Management System. Many major truck and bus manufacturers have agreed to give third parties access to vehicle data wth a common interface as open standard, the FMS-Standard and the Bus-FMS-Standard respectively. Supported information is dependent upon vehicle equipment, improve functionality and security, offering many benefits when integrating with critical business and production systems. The FältCom MIIPS® software is available in several editions adapted for different application areas such as logistics, security and industrial automation.

Examples of patent pending functionalities:

any time, this without the terminal first sending request for information. Ho�ever using a SIM card subscription with dynamic IP addressing can be fully satisfactory for many applications. An event

on the terminal side or the terminal itself can initiate the data session alternatively SMS can be used forwake-up of the terminal when needed.

Besides the basic security in cellular and fixed IP networks, the server and terminal software adds on its own security features which substantially strengthens the security level.

Some examples:

• The FältCom MIIPS® terminal has a built-in, secure and configurable firewall using iptables to support NAT/PAT, redundancy etc.

• Encryption using AES. RSA is used for key distribution and HMAC-D5 is used for authentication.

• Only registered terminals are accepted by the FältCom Enterprise Server. Unregistered terminal

access attempts ill be blocked and are logged as faults and notification can be sent by SMS, e-mail or XML

over TCP/IP.

Optional security features can be implemented for customer specific

needs.

The FältCom MIIPS® technology offers a very high availability for use in demanding environments such as business critical systems, industries, vehicles etc.

Some examples:

• Redundant communication possibilities

• A hardware based watch-dog monitoring the processor and application status in the terminals and rebooting if necessary

• Terminals fulfilling applicable industrial, alarm and vehicle standards

The FältCom MIIPS® Committo can be delivered with installed SIM

card and with an essential custom configuration. When connected to power, the terminal fetches and auto-installs the device specific configuration from the FältCom Enterprise Server. This Plug�and�

Play functionality minimises the need of technical know-how, making the installation very simple and cost-efficient.

To obtain the optimal antenna selection at remote sites, direction and placement, the built-in facilities in the terminal can be used alternatively this can be managed remotely from the FältCom Enterprise Server.

Operating system: Linux

Memory:                 128 Mbyte RAM, 1Gbyte Flash memory

Software updates:  Automatic via server or manual via USB

Configuration:         Automatic via server or manual via Ethernet

IP assignment:       DHCP Client for GSM/UMTS interface. DHCP Client or static on Ethernet.

IP distribution:      Support for DHCP Server

Status indication:  4 LEDs indicates terminal and network status

Interface:              2 Ethernet ports (Ethernet 802.3 10/100 Base-T), 2 Serial ports V24/V28, (RS-232), 6      Inputs, digital/analogue use. Event notifications for circuit make/break, threshold values or window values,

4 I/O ports for control and detection, 2 1-pole switching relays for galvanic isolation, 1 USB Host 2.0, 2 CANbus HW supporting CAN Specification Version 2.0B, 1 SD-card connector, internal Audio in, speaker out.

Frequency bands: LTE 800/900/1800/2100/2600 MHz

WCDMA 900/2100 MHz

EDGE/GPRS/GSM 850/900/1800/1900

Peak downlink speeds up to 100Mbps and peak uplink speeds up to 50Mbps

Connector: FAKRA D/m

Type: Channels 22 tracking / 66 acquisition, -159 dbm (MediaTek MT3329 receIver)

• –148dBm (Cold Start Acquisition)

• –165 dBm (Navigation)

• Configurable fix rate, up to 10Hz (default: 1Hz)

Connector: FAKRA C/m

Cellular authentication: PAP or CHAP depending on the operator services

Firewall: iptables, NAT/PAT. Configured automatic via server or manual via Ethernet or serial port

Device Management communication (FältCom Enterprise Server)

Key distribution: RSA (1024/2048)

Authentication: HMAC-MD5

Data encryption: AES (128/256)

Data encryption: AES (128/256)

Supply: Separate ports for fixed power supply and battery backup, with individual voltage monitoring and battery guard.

Supply voltage: 9–36 V DC

Power consumption: Typical ~ 2.5 W (excluding USB), Power save mode ~ 250 mW

Material: Anodised aluminium

Dimensions: 45 x 130 x 175 mm (H x W x D)

Weight: 580 gram

Capsulate insulation: IP31 (with plastic gables)

Operating temperature: -30° to +70° C

Regulatory approvals: CE      EN 301 511   IEC 60068-2-1A

IEC/EN 60950       1

EN 60529

IEC 60068

�

2

�

2B

U

�

60950

�

1

1999/519/EC

IEC 60068

�

2

�

14Na

EN 301 489�

7

72/245/EEC

IEC 60068

�

2

�

27Ea

ISO 7637

�

1

EN50155

IEC 60068

�

2

�

30Db

FCC Class 15 Part B

E

�

Mark

IEC 60068

�

2

�

56Cb

IEC 60721

�

3

�

5 Class 5K3, Class 5M2

IEC 60068

�

2

�

64Fh

Warranty: 12 monthts or depending on SLA

FältCom develops innovative solutions for highly secure and reliable communication with comprehensive Device

Management.